©Copyright © 2009 Dostek Engineering Sdn Bhd. All Right Reserved. Created by Bangkit Ummah Digital Marketing
©Copyright © 2009 Dostek Engineering Sdn Bhd. All Right Reserved.
Created by Bangkit Ummah Digital Marketing
The M 2103 C series Controlmatik ABW chlorine gas detection sensor is designed to detect and indicate chlorine concentrations in the air and to provide safety in storage areas and in places where the gaseous Chlorine and Sodium Hypochlorite are dosed.
The sensor is mounted in an IP 65 housing and is connected via connector to the amplifying electronics, which is mounted on the same housing.
The sensor is connected to the unit with two-wire current loop signal and operates on basis of chemical cell and a diffuse capillary blockade. Hydrochloric acid concentrate in the chemical cell is regenerated during the chemical reaction and free oxygen is released. The quantity of the released oxygen defines the signal at the output.
|
Electrical Data
|
|---|
|
Measuring unit: PPM (1 PPM Cl2 = 3,214 mgCl2/m3)
|
|
Temperature range: from – 20 to + 50ºC
|
|
Resolution at 20 °C: 0,1 PPM
|
|
Repeatability: 2%
|
|
Measuring range: 0-10 PPM, 0 – 20 PPM
|
|
Pressure operating range: from 90 to 1100 mBar
|
|
Relative moisture operating range – permanently: 15-90% (Humidity)
|
|
Product lifetime (without shock concentrations): 2 years
|
|
Current output: 4 – 20 mA
|
|
Supply voltage: 9 – 26 VDC
|
|
Protection: IP 65
|
|
Dimensions: 98 x 197 x 50 mm
|
|
Weight:0.5 kg
|
The M 2103 C series Controlmatik ABW chlorine gas detection sensor is designed to detect and indicate chlorine concentrations in the air and to provide safety in storage areas and in places where the gaseous Chlorine and Sodium Hypochlorite are dosed.
The sensor is mounted in an IP 65 housing and is connected via connector to the amplifying electronics, which is mounted on the same housing.
The sensor is connected to the unit with two-wire current loop signal and operates on basis of chemical cell and a diffuse capillary blockade. Hydrochloric acid concentrate in the chemical cell is regenerated during the chemical reaction and free oxygen is released. The quantity of the released oxygen defines the signal at the output.
|
Electrical Data
|
|---|
|
Measuring unit: PPM (1 PPM Cl2 = 3,214 mgCl2/m3)
|
|
Temperature range: from - 20 to + 50ºC
|
|
Resolution at 20 °C: 0,1 PPM
|
|
Repeatability: 2%
|
|
Measuring range: 0-10 PPM, 0 - 20 PPM
|
|
Pressure operating range: from 90 to 1100 mBar
|
|
Relative moisture operating range - permanently: 15-90% (Humidity)
|
|
Product lifetime (without shock concentrations): 2 years
|
|
Current output: 4 - 20 mA
|
|
Supply voltage: 9 - 26 VDC
|
|
Protection: IP 65
|
|
Dimensions: 98 x 197 x 50 mm
|
|
Weight:0.5 kg
|
If you have any enquiry about quotation or cooperation,please feel free to email us at sales@dostek.com.my
or use the following enquiry form. Our sales representative will contact you soon. Thank you for your interest in our products.